Join the conversation on the friendliest most helpful DIY solar energy forum
Looks great..Good Job
Most parts were from recycled parts and scrap yard. Next I will make a box for battery and electronics.
real nice job mark
Thank you for posting this picture. I thought of doing the same.
I am into FTA (free to air) and I am using a 10 foot dish at this moment and I also have an 7 1/2 foot dish in storage.
Is your dish moveable to follow the sun and could you post pictures of the backside ?
I think the one in my pic is from 7.5 ft set up. I am working on one I like better from a bigger one most likely the 10 footer. I like the bigger one because it has a large square made of square tubing and looks like it will be easier to mount more panel to. My plan is to some day add a tracker. I will get some pics.
Johann my pics of the back are not very good, I also got a little too close to the fence, Not sure if you can see the part were the satellite dish actuator goes i have piece of straight metal to keep it stationary but some day hope to add satellite dish actuator and tracker. Too I got busy and forgot to post pics.
Mark, tank you for posting those pictures. You have a very nice setup there.
You inspire me since I would have many parts here already to do something like that.
Yes, I seen the picture with the actuator mount and your piece of metal on the picture.
I was thinking to put 6-8 100 watt panels on it, since the total amount would still weigh less than the 7 1/2 foot dish. I just bought an tracker for an different design and setup, but I did not mount it yet nor used or tested it yet.
Join Do It Yourself Solar Energy Forum
Welcome toDo It Yourself Solar Energy Forum
Sign Upor Sign In
Or sign in with:
DIY Solar Energy Forum Online Store
Thrive Market is here!
The Vitamin D Protocol
Harbor Freight Owners Manual [new kit]
"No Electric Meter" T Shirts
The Survivalist Blog
© 2016 Created by Renewable Ray.
Report an Issue |
Terms of Service
Please check your browser settings or contact your system administrator.